Recently Updated Pages

Part 1: Setup on the Dosidis+ Device What do you need? Device switched on and ready Ap...

Raindancer power supplies help your solar panels stay reliably charged, even when there's no su...

VRI Zones The VRI zone importer can be used to import VRI zones from a shapefile int...

If you do not receive any notifications via WhatsApp, this may be because WhatsApp has not author...

1. Creating a new API in the Raindancer portal Define API Connection in Raindancer under Confi...

Settings in Raindancer Mode Set-Up the Raindancer Mode   Setup the GSM Module in Parameter-S...

For SMS Mode Speed = 11,1 → Const 100.  M.Data 30 = 1 (All phone numbers can send commands)...

This section explains how to remove the gasket between the base plate and the blue box cap.  It ...

In these guide, we will take you through the necessary steps to replace the base plate including ...

This section of the Raindancer portal is designed to enable you to plan your assignments in advan...

Access to the control system is a pivotal aspect of operating the Raindancer for your irrigation ...

For transport, you should fix the gun (e.g. with a rope) or fold up the stop on the gun.Otherwise...

If your irrigator is stored indoors for several days, the solar module will discharge. You shoul...

If the solar module is dirty, you can clean it with a cleaning sponge with the "har...

To reset the module, you need the reset stick. Simply insert this reset stick into the appropria...

Introduction We leave the installation of the solar module up to you. You should ensure that t...

Overview It is possible to draw areas on the fields to trigger one or more of the following acti...

You can draw event areas on your fields to trigger actions there. When the irrigator (the trolle...

Fields can only be drawn in the portal using a PC.Tablets are only of limited use for editing fie...

These guide will help you to import your field data from the various sources. Click on Fields → ...