Skip to main content
Advanced Search
Search Terms
Content Type

Exact Matches
Tag Searches
Date Options
Updated after
Updated before
Created after
Created before

Search Results

5 total results found

Troubleshooting in Raindancer

Instructions & How-To's

Here you will find simple answers to the most common problems and difficulties when using Raindancer

Troubleshooting

Troubleshooting the Beacon

Instructions & How-To's Troubleshooting in Raindancer

Compatibility check: Beacons are immediately ready for use on the Ethernet module (in combination with a router with active DHCP). There is a known incompatibility with certain versions of the Ethernet module (specifically: Rev.4.2, labelled accordin...

Troubleshooting
Beacon
Hardware
Beacon

Reset the Module

Instructions & How-To's Raindancer GPS Modul

To reset the module, you need the reset stick. Simply insert this reset stick into the appropriate connector on your Raindancer module. It is the port to which the pressure sensor is usually connected. Connect the reset stick straight and pull it straight ou...

GPS Module
Reset
Troubleshooting
Reset Stick
Hardware
GPS Module

Remove the Motor Box Gasket

Instructions & How-To's Troubleshooting in Raindancer

This section explains how to remove the gasket between the base plate and the blue box cap.  It is possible that the electronics of the motor box do not correctly detect the revolutions of the motors, which either leads to a blocked stop error message or to t...

Troubleshooting
Sector
Hardware
Sector Control
Sector Control
Angle

Troubleshooting the Sector Control

Instructions & How-To's Troubleshooting in Raindancer

The following assistance applies to sector firmware version 36 and newer. For older versions, errors may have different causes. Ensure that your Raindancer sector control is switched on and connected to a transmitting Raindancer module. All error messages fr...

Sector Control
Troubleshooting
Sector
Hardware
Sector Control