Search Results

Mounting a Sector Control on a Irrigation Trolley.  What do I have to do? Remove the cannon. Remove the cannon stops. Place the seals between the flanges. Align the sector control so that the blue motor box faces the hose reel. Fasten the supplie...

After mounting it is important to configure the sector control for the first time. Read the Zero Position From the Sector Control ero Position: Please hold (or stick) the included sticker with the angle indication in a way that the zero mark points towards...

Basically, you have two operating modes with the sector control: AUTO:ON ⇾ You let Raindancer calculate and automatically set the stop angles  AUTO:OFF ⇾ You switch off the automatic system and set the stop angles yourself    To set Auto:On/Off...

How do you actually set the stops on the gun to ensure the most even water distribution possible? We therefore took the time in late summer to take some measurements. The water distribution of an irrigation run naturally depends on the setting of the sto...

Irrigation runs permanently stores the path of the irrigation machine in the system. This information offers several advantages in the daily use of the Raindancer app and sector control. Why do you need runs? Length of the irrigation pathIf an irrigator st...

Before each irrigation, it is necessary to prepare the sector control to ensure trouble-free operation from the start. A connection to the Raindancer is usually only made every 7 minutes!The correction of the stops is therefore not done immediately. Checklis...

Automatic Speed adjustment via remote control on the hose reel To use Auto Speed, you need an SMS or Internet control on the hose drum that allows you to set the speed. Follow this guide to set up the control system What do I have to do  Set the irrigat...

You can draw event areas on your fields to trigger actions there. When the irrigator (the trolley) "enters" and/or "leaves" these areas, the following actions, among others, can be triggered: A notification is sent to employees / free phone numbers (e.g. i...

Overview It is possible to draw areas on the fields to trigger one or more of the following actions when entering or leaving: Send a message with customised text  Send a command Stop active irrigation REMOTE CONTROL  Change irrigation amount REMOTE CO...

This section explains how to remove the gasket between the base plate and the blue box cap.  It is possible that the electronics of the motor box do not correctly detect the revolutions of the motors, which either leads to a blocked stop error message or to t...