Search Results

Mounting a Sector Control on a Irrigation Trolley.  What do I have to do? Remove the cannon. Remove the cannon stops. Place the seals between the flanges. Align the sector control so that the blue motor box faces the hose reel. Fasten the supplie...

Basically, you have two operating modes with the sector control: AUTO:ON ⇾ You let Raindancer calculate and automatically set the stop angles  AUTO:OFF ⇾ You switch off the automatic system and set the stop angles yourself    To set Auto:On/Off...

How do you actually set the stops on the gun to ensure the most even water distribution possible? We therefore took the time in late summer to take some measurements. The water distribution of an irrigation run naturally depends on the setting of the sto...

Before each irrigation, it is necessary to prepare the sector control to ensure trouble-free operation from the start. A connection to the Raindancer is usually only made every 7 minutes!The correction of the stops is therefore not done immediately. Checklis...

For transport, you should fix the gun (e.g. with a rope) or fold up the stop on the gun.Otherwise, the gun may hit the stops and bend them during transport Alternatively, you can simply decouple the stops of the sector control.

In these guide, we will take you through the necessary steps to replace the base plate including the motors. This is only necessary if your motors are faulty and you have been sent a replacement kit. The removal of the box is identical: Removing the motor b...

This section explains how to remove the gasket between the base plate and the blue box cap.  It is possible that the electronics of the motor box do not correctly detect the revolutions of the motors, which either leads to a blocked stop error message or to t...