Skip to main content
Advanced Search
Search Terms
Content Type

Exact Matches
Tag Searches
Date Options
Updated after
Updated before
Created after
Created before

Search Results

8 total results found

Instructions & How-To's

Here you will find the necessary information on the installation and basic settings of the Raindancer product range. You can find a first introduction to the use of Raindancer under:   Getting started with Raindancer If you need help with the mounting of you...

Tutorials
First Steps

Settings and Configurations

Instructions & How-To's

This section is constantly being updated and expanded to provide as many answers as possible to common questions and useful information. If you have not found what you were looking for in this section, please let us know which topic you were missing and we wi...

Software
Video
Tutorials

Irrigation Machine - Take Control, Remotely

Instructions & How-To's

Select your control unit and follow the instructions. Please understand that we have no direct control over the software version of the machine computers and that these instructions may differ slightly from those on your machine. If you have any further ques...

Irrigator
Tutorials
Controller
Machine

Getting started with Raindancer

Instructions & How-To's

Congratulations on your decision to work with Raindancer. Thank you for your trust and welcome to the Raindancer cosmos. Before you can get started and view all your irrigations in one app, there are a few small things you need to set up first. Login creden...

Software
Portal
Tutorials
First Steps
Video
User
Short
User
Notification
Irrigator
Portal
Irrigator
Controller
Well
Short
Fields
Short
Fields
Import
Runs
Short

Install Sector Control correctly

Instructions & How-To's The Sector Control

Mounting a Sector Control on a Irrigation Trolley.  What do I have to do? Remove the cannon. Remove the cannon stops. Place the seals between the flanges. Align the sector control so that the blue motor box faces the hose reel. Fasten the supplie...

Hardware
Sector Control
Sector Control
Mounting
Sector Control
Tutorials

Initial start-up of the sector control

Instructions & How-To's The Sector Control

After mounting it is important to configure the sector control for the first time. Read the Zero Position From the Sector Control ero Position: Please hold (or stick) the included sticker with the angle indication in a way that the zero mark points towards...

Software
App
Sector Control
Nullpunkt
Mounting
Tutorials

Manual Sector Control

Instructions & How-To's The Sector Control

Basically, you have two operating modes with the sector control: AUTO:ON ⇾ You let Raindancer calculate and automatically set the stop angles  AUTO:OFF ⇾ You switch off the automatic system and set the stop angles yourself    To set Auto:On/Off...

Hardware
Sector Control
Tutorials
Sector Control
Manuel
Sector Control

Replace motorbox base plate assembly

Instructions & How-To's Troubleshooting in Raindancer

In these guide, we will take you through the necessary steps to replace the base plate including the motors. This is only necessary if your motors are faulty and you have been sent a replacement kit. The removal of the box is identical: Removing the motor b...

Hardware
Sector Control
Tutorials
Sector Control
Hardware
Repair