Manual Sector Control

Basically, you have two operating modes with the sector control:

To set Auto:On/Off, go to the irrigator, then to the Sector Area.
Here you will find the "AUTO" switch for switching over.

You normally work in automatic mode (AUTO:ON).
The stops are calculated by the raindancer and set automatically.

Manual Adjustments

If you want to set the stop angles manually on the smartphone, switch to AUTO:OFF

You will now be asked whether you want to switch ...

image.png

image.png

image.png

The connection to the raindancer is usually only established every 7 minutes!
The correction of the stops is therefore not immediate.


Revision #5
Created 4 March 2024 15:10:30 by Jens Götze
Updated 30 April 2024 17:18:29 by Jens Götze